Skip to main content
Support

How To Access Your NVR

Applies to Recorders Updated 1 min read

This article will briefly go over the methods you can use to access your camera system's settings. This can be accomplished one of two ways.

  • Method 1: Hardware

This requires connecting a TV/Monitor and USB computer mouse directly into the NVR unit.
You will then be able to click on the user interface and access settings.

  • Method 2: Network

If you know the local IP address of the NVR, it can be accessed with a web browser.
On a computer, you can type this IP address in the address bar to access its settings.

    • If you do not know the IP address of your NVR. You can attempt a network scan with our config tool software to find it.
      https://icrealtime.com/downloads/23
    • If the tool is unable to detect the NVR, the hardware method will be required.

Still stuck?

Our support team answers by email. It helps to have these ready:

Model numberSerial numberFirmware or app versionWhat you have tried
Contact supportSoftware downloads
Initialize an NVR from the Local Interface Initialize an NVR from a Computer Recorders with IR support IR Remote Control Adding IP Cameras To A Hybrid Recorder How do I get my recorder on the network? P2P Enabling Time Sync Settings (Setting Daylight Savings (DST) & GMT Offset)