IR Remote Control

This guide will walk you through pairing an IR remote to the recorder. 

1.) You should first confirm the recorder's "Device No." under the "Basic Settings", under "System Config." The device no. will be used later on as the remote address in the final step. 

a.)
b.)

c.)


2.) To pair your recorder's remote, you'll want to point the remote at the recorder, and press the "Add" button on the far-right corner. 



3.) Use the UP and DOWN directional buttons on the remote to set the remote address. Then hit "OK"
when you're done.



Your remote should now successfully be paired to your recorder.