Changing Device IP's in a 4.0 NVR
To change Camera IP's from the NVR click Here
To change the IP settings on a network recorder go to:
on 'Edit' icon
Once you click the edit icon this window will appear for the devices network settings.
Make your desired IP changes and click "OK" the device will change to that IP address
________________________________________________________________________________________________________________
Changing Camera IP's
This article assumes your camera's have been initialized. If it shows your cameras are uninitialized please refer to this article: Initializing IP Camera
To change a camera IP in the recorder, go to
Search for the device in the table above.
Once you find the camera in question, you can check the device and click "Modify IP"
Clicking Modify IP will give you a familiar window. Make your changes, click "OK" to save them, then run another device search to find the device with your new IP changes.
Still stuck?
Our support team answers by email. It helps to have these ready: